- Back
- Product catalog
- Subcategory
- Subcategory
- Pistons
- * All piston models
- *Axis & Circlips
- Alcyon
- AMC
- Aubier Dunne
- Automoto
- Bernardet
- Black Burn
- BMW
- Chaise (engine)
- DKW
- Favor
- Gnôme Rhône
- Himo
- Honda
- Indian
- Itom
- Jap
- Jonghi
- Kreidler Florett
- Labor
- Lambretta
- Lavalette
- LMP
- Mag
- Marquet
- Minarelli
- Mistral
- Mobyscooter
- Monet Goyon
- Morini
- Motobécane
- Motobloc
- Nervor
- Peugeot
- Poulain
- Puch
- Radior
- René Gillet
- S.E.R.
- Sachs
- Saroléa
- Solex
- Terrot
- Ultima
- Vap
- Vespa
- Ydral
- Zundapp
- Zurcher
- Fuel tank Power supply
- Bicones & Olives
- Cap
- Fuel filler cap
- Fuel filler cap spring
- Fuel filter
- Fuel tank
- Fuel tank hubcap
- Fuel tap petrol motos old
- Oil cap
- Petrol hose (pastic)
- Petrol hose (stainless)
- Petrol hose collars
- Plate for knee protection rubber
- Rubber gasket for fuel cap
- Shock absorber fuel tank
- Spare Parts fuel tap
- Saddlery
- Griffon
- Motobécane
- 175cm³ - 1930s
- 250cc
- 350cc
- 500cc
- AB1 Motobécane 100cm³
- B1V2 Motobécane 100cm³ - Grand Routier 2-3 speeds
- D45-C45-D45S and others
- L4C Motobécane 350cm³
- LT-LT1-LT2-LT3 Motobécane 125cm³
- Mobyscooter 125cm³ type M and O (Mountain luxury)
- Mobyscooter 125cm³ type S.B or S.V.
- Mobyscooter 125cm³ type S.B.H or S.V.H.
- Mobyscooter 125cm³ type S.B.S or S.V.S.
- Moped Mobylette
- Pony Motobécane 50cm³ - 2 strokes - 2 speeds
- Scooter Motobécane
- Z46 or U46 Motobécane Motoconfort 125cm³
- Z47 or U47 Motobécane Motoconfort 125cm³
- Z56 or U56 Motobécane Motoconfort 125cm³
- Z57 or U57 Motobécane Motoconfort 125cm³
- Peugeot
- Moped Peugeot
- Peugeot 100cm³
- Peugeot 125cc
- Peugeot 175cc
- Peugeot 175cm³ TC4
- Peugeot 256 and 356cc
- Peugeot P103 - 175cm³ (1920)
- Peugeot P104 - 350cm³ (1920-1930)
- Peugeot P107 - 350cm³
- Peugeot P108 - 250cm³
- Peugeot P109 - 175cm³
- Peugeot P110 - 215cm³
- Peugeot P111 - 350cm³
- Peugeot P112 - 350cm³
- Peugeot P114 - 175cm³
- Peugeot P210 - 250cm³
- Peugeot Triporteur 125cc
- Scooter Peugeot
- Services made-to-measure
- Newness
- Search by vehicle
SearchingBy vehicle
- Newsletter
Spokes manufacturing made to measure Stainless
Spokes manufacturing made to measurefor all brands of motos on Stainless.
The following are considered spokes manufacturing made to measure: spokes rods , swaged spokes or reinforced and any spokes with a angle other than 90°.
Rods available: Diameter: 2 to 5mm in Stainless.
Minimum quantity per command: 18 pieces - Maximum length: 270mm.
Price per set: 1 Spokes + 1 Nut.
Refurbished part
French production
Reference | Diam. rod | Length - Angle | Type ofNuts | Availability | Price VAT | Add to cart |
RSI-01 | 2mm | to the | ¤ d'Nipple 4mm | Out-of-Stock | €1.80 | |
RSI-00 | 2mm | to the | ¤ d'Nipple 4mm | Out-of-Stock | €1.80 | |
RSI-03 | 2.3mm | to the | ¤ d'Nipple 5mm | In stock | €2.00 | |
RSI-02 | 2.3mm | to the | ¤ d'Nipple 4mm | In stock | €2.00 | |
RSI-04 | 3mm | to the | ¤ d'Nipple 5.4mm. | In stock | €2.20 | |
RSI-05 | 3mm | to the | ¤ d'Nipple 6mm | In stock | €2.20 | |
RSI-06 | 3.5mm | to the | ¤ d'Nipple 7mm | In stock | €2.80 | |
RSI-07 | 4mm | to the | ¤ d'Nipple 7mm | In stock | €3.00 | |
RSI-09 | 4/3.6mm | to the | ¤ d'Nipple 7mm | In stock | €3.30 | |
RSI-10 | 4.4/4mm | to the | ¤ d'Nipple 7mm | In stock | €3.40 | |
RSI-08 | 4.5mm | to the | ¤ d'Nipple 8mm | In stock | €3.80 | |
RSI-12 | 5mm | to the | ¤ d'Nipple 8mm | In stock | €4.00 | |
RSI-11 | 5/4mm | to the | ¤ d'Nipple 7mm | In stock | €3.50 |
Find outMore
Dimensions to be entered according to the type of spokes:
A = Head depth of spokes,
B = Height from head to tip of thread,
C = Total height of the spokes in theaxis of the rod (head included),
D = Openingangle of the spokes head in degrees,
E = Diameter of the rod of the spokes (if reinforced head, please send us the 2 diameters, rod and reinforcing).
Nuts : For spokes in diameter 2.35 and 3mm, don't forget to specify the diameter of the Nuts desired.
see details in the table above.
*
CONDITIONS OF SALE:
Option 1: Either we work from an existing model, fromorigin, in this case, you must send us the model(s) of spokes to be made with your command. The production lead time begins as soon as we receive all the elements required for the command( spokes model, command number and payment).
Option 2: You can determine the exact dimensions of your models.
a/ Access our online form.
- Fill in the characteristics of your spokes , once the sketch has been duly completed, click on "Send". Validate and pay your command online.
b/ Download the sketch of the spokes model to be manufactured.
- Fill in the characteristics of your spokes and return the sketch by e-mail. Validate and pay your command online.
Whichever option you choose (1 or 2), all specifications must be filled in precisely. In the event of error, we will not be able to exchange custom-built series based on the quotations sent to us. In case of doubt, please send us the model fromorigin.